Informational Guide

How To Take A Tire Off A Rim

It doesn't cost a lot to figure out how to take a tire off a rim. In this guide, we look at how to take a tire off a rim by various methods. Our instructions include how to take a tubeless tire off a rim, as well as how to take a truck tire off the rim. 

Learning how to take a tire off a rim by hand isn’t expensive, but it can be tricky to figure out. Tire shops use equipment to separate the tire’s bead, which isn’t simple without the right tools.

What You’ll Need 

  • Floor Jack 
  • Impact Driver 
  • Crowbar 

Step By Step Instructions 

How do you remove a tire from an aluminum rim by using your hands? We recommend following these steps if you want to know how to take a tire off a rim at home without any special tools. You can also use these instructions to figure out how to take a tire off a truck rim.

  1. 1
    Lift the vehicle and remove the wheel from the car. 
  2. 2
    If the tire isn’t flat, let the air out completely. Take off the valve cap and press in on the release to let out the air. 
  3. 3
    Break the bead of the tire from the rim. Place the tire flat on the ground, keeping the hubcap facing up. With a crowbar, insert the tip so it catches onto the lip of the tire and push upward. You need to work around the rim until the tire has been lifted off. 
  4. 4
    Grab onto the tire by a section that has been removed.  
  5. 5
    Pry any remaining sections off of the rim.  

You can use this method with any type of tire that needs to have the bead broken. If you have trouble getting the tire off, you might need to visit a local tire shop instead.  

hwo to take a tire off a rim

How To Take A Tire Off A Rim By Machine 

If you can figure out how to take off a tire on a rim with a special machine, you will save yourself a lot of time and hassle. 

However, using this method to learn how to take the tire off a rim will cost you more money because of the additional equipment.

What You’ll Need 

Step By Step Instructions 

These steps outline how to take a car tire off a rim with a special machine. It can be used with a variety of types, even if you want to know how to take a tire off a motorcycle rim.  

  1. 1
    Bolt your tire changing machine to plywood. Make sure the machine is secured. 
  2. 2
    Open the tire stem valve. Twist open the cap counter-clockwise to remove it. Place the stem somewhere safe for later. 
  3. 3
    Place the tire on the machine base and secure it in its spot. 
  4. 4
    Use the changing machine rod to pull the tire bead from its rim. The metal tube fits into the arm’s open end. You can stick the pointed end of the rod into the arm and push it down. As you push, it wedges out the rubber, leaving the rim exposed.  
  5. 5
    If you need to loosen up the bead more, push the tire down more with your foot or hand. Work around the whole wheel until the rim is free.  
  6. 6
    Flip the wheel onto the other side and do the same thing with the tool’s wedge.  
  7. 7
    Use dish soap if you are having trouble with the rim. This soap provides more lubrication, making it simple to remove. You could also use WD-40 or cooking oil. 
  8. 8
    You may also need the help of a crowbar to get more leverage.  

When you put the tire rim down, you want to take extra precautions. After all, it does no good to learn how to take off a tire off a rim just to ruin the rim when you are finished. We recommend using a material, such as a rubber mat or padding on the changer’s base when the rim goes face down. 

removing a tire from the rim

How Long Does It Take To Remove A Tire From The Rim?

The time it takes to learn how to take off a tire from a rim depends on what method you are using and what type of tire you are working with.

If you are learning how to take a tire off the rim at home without a machine, you will spend more time. However, working with a machine should take you thirty minutes or less.

People Also Ask (FAQs)

Is it hard to take a tire off the rim by hand? 

Learning how to take a tire off the rim by hand is completely safe. However, you want to take your time and make sure you have the necessary tools before you get started.  

How much does it cost to take a tire off the rim through a mechanic? 

If you don’t have the right tools to learn how to take the rim off a tire at home, you can visit a local tire shop. This will usually cost you about $15 a tire, but might be less if you are having new tires installed.

How do you reattach a tire to a rim? 

After you’ve learned how to take a motorcycle tire off the rim, it’s time to put it back on. Use some liquid dish soap to lubricate the tire and work slowly around to reattach it. Once it is placed on the rim, you want to carefully inflate the tire back to its original pressure, but you might hear some popping sounds as the tire reseats on the rim.  

How do you break a stubborn tire bead? 

You can use some dish soap to provide additional lubrication. If you don’t have dish soap on hand, opt for cooking oil or WD-40 instead for a quicker bead break.  


Learning how to take off a tire from the rim isn’t complicated, but the job itself can take time, especially if you don’t have the right tools. With our guide, you can get the tire removed from the rim quicker, with less effort.